Safety boundaries / 2026-11-20

What a breakdown temperature above 400 °C does and does not say

The breakdown temperature is a material-level property of a separator, and the separator does more in a cell than provide one barrier. This article sets out what the figure can support, what it cannot, and which parts of a cell safety assessment remain outside it.

01

The note

Figures are quoted with their test condition and standard; project-specific data is confirmed one to one at the sample stage.

What it supports

In a nitrogen atmosphere at 100 °C/min with 0.02 N tension, dimensions remain almost unchanged from room temperature up to and beyond 400 °C, with an obvious change appearing above that point. The conclusion this supports is precise: the separator has a measurable boundary to its dimensional stability under heat, and that boundary sits well above any ordinary heat treatment window.

Together with a thermal shrinkage of 1-2% at 180 °C / 30 min in an air atmosphere, it shows that the material does not change dimension appreciably across the temperature range a cell actually works in. Both statements are repeatable test results.

What it does not support

It does not support a claim that the cell cannot go into thermal runaway. Thermal runaway is a cell-level safety question involving the electrode active materials, the electrolyte system, the separator, the current collectors and the pack-level thermal management. A single material property covers one part of that chain.

The company's own published wording is equally careful: the thermal stability of the coating layer is verified under agreed test conditions, and a single temperature does not substitute for a cell-level safety assessment. Material temperature resistance and cell safety level are not equivalent.

The other jobs the separator does

Inside a cell the separator also carries electrolyte wetting and the ion transport pathway, interfacial adhesion, the suppression of lithium dendrite growth, and mechanical retention after heat treatment. Each of these has its own test method and acceptance basis, and none of them can be proven by another.

That is why a technical discussion should list the metrics of concern one by one. Aligning thickness, the shrinkage condition, peel strength, retention, air permeability and porosity item by item is more reliable than summarising the whole with one headline temperature.

How to write such a figure down

A useful form is: under which condition, which result, by which standard. All three make the statement checkable. Without any one of them, a reader cannot tell whether the number is comparable to their own duty.

The practice here is to bind every performance figure to its test condition and method, and to list nominal values next to their standards on the product pages. The benefit is that a discussion ends up on specific clauses instead of adjectives.

02

Related pages

To discuss a parameter range for a specific cell architecture, contact the technical team directly.

← Back to insights