SEPARATOR FILM / Product model
Aramid-coated separator
JTF-R10LP
Aramid-coated separator (model JTF-R10LP) is an aramid-coated lithium-ion battery separator produced by Taizhou Jitri FengFang New Materials Technology Co., Ltd., with a nominal total thickness of 11 µm. It adds an organic para-aramid coating on top of a polyolefin base film, which raises the heat resistance and mechanical strength of the separator and improves adhesion to the electrode, suppressing lithium dendrite growth and stabilising the interface. It suits EV traction batteries and high-safety consumer electronics. The exact coating composition and coating sequence are company trade secrets and are not published; they can be discussed in a one-on-one technical meeting.
Technical requirements
The nominal requirements below are registered in the company shipping technical specification sheet, each with its test method and the standard it follows.
| Test item | Nominal value | Standard |
|---|---|---|
| Appearance | Milky white, free of pinholes, creases, tears or deformation - | GB/T 36363-2018 |
| Thickness | 11±2 µm | GB/T 6672-2001 |
| Areal density | 10±2 g/m² | GB/T 31729-2015 |
| Porosity | 40±5 % | GB/T 36363-2018 |
| Air permeability | 260±50 s/100 mL | GB/T 36363-2018 |
| Puncture strength | ≥300 gf | GB/T 36363-2018 |
| Tensile strength MD / TD | ≥1500 / ≥1000 kgf/cm² | GB/T 1040.3-2006 |
| Thermal shrinkage (150 °C / 0.5 h) MD / TD | ≤3.0 / ≤3.0 % | GB/T 36363-2018 |
| Thermal shrinkage (180 °C / 0.5 h) MD / TD | ≤3.0 / ≤3.0 % | GB/T 36363-2018 |
The table gives nominal values; the measured data of a specific batch follows its test report. A roll whose appearance fails is rejected, and any failing physical property should be re-checked.
Performance
Each core property is given with its test condition and the standard it follows.
- Heat resistance: thermal shrinkage of only 1-2% after 180 °C / 30 min (GB/T 36363-2018).
- Breakdown temperature: above 400 °C (GB/T 36800-2018, N2, 100 °C/min, 0.02 N).
- Mechanical strength: the aramid coating keeps the puncture strength unchanged or slightly higher after heat treatment at 145 °C / 1 h and 140 °C / 1 h; double-side coated designs retain 40%-60% in the 150 °C / 0.5 h band and above 20% in the 180 °C / 0.5 h band.
- Interface adhesion: adhesion to the electrode is enhanced, with an internal acceptance criterion for peel strength > 30 N/m (GB/T 7122-96).
- Lithium dendrite suppression: the aramid coating suppresses dendrite growth and improves interface stability.
Standards and test equipment
Section 4.1 (standards) and 4.2 (test equipment) of the shipping technical specification sheet.
- GB/T 36363-2018Polyolefin separators for lithium-ion batteries
- GB/T 6672-2001Determination of thickness of plastic film and sheeting by mechanical measurement
- GB/T 31729-2015Determination of mass per unit area of plastic film
- GB/T 1040.3-2006Determination of tensile properties of plastics, Part 3: Test conditions for thin films and sheeting
- GB/T 7122-96Determination of peel strength of high-strength adhesives, floating roller method
Main test equipment: Pinhole detector (Labthink SBG-80T), Thickness gauge (Miuimar C1202, 0.01 mm micrometer), Electronic balance (BSA124S), Air permeability tester (GURLEY 4110+4320), Electronic tensile tester (ASR-1021), Forced-air drying oven (WS-101-0AB).
Other models
All models on sale and their total thickness.
| Model | Product name | Total thickness |
|---|---|---|
| JTF-R20LA8 | Aramid-coated separator | 9 µm |
| JTF-R208BL | Aramid-coated separator | 11 µm |
| JTF-R10DH | Semi-solid aramid-coated separator | 13 µm |
| JTF-R208DL | Semi-solid aramid-coated separator | 14 µm |
| JTF-R20LD8 | Aramid-coated separator | 14 µm |
Packaging, storage and warranty
The product is packed in a reinforced bag, positioned on a locating plate inside a rigid carton, and an inspection report is included in the package. The outer label sits in a prominent position on the carton and the inner label on the inside of each separator roll; both state the company name, the product name, the model and the specification.
Storage: keep sealed in a clean, dry and ventilated warehouse, more than 2 m away from heat sources, out of direct sunlight, protected against mechanical impact, rain and sun, with moisture protection. Shelf life is 12 months from the production date.