SEPARATOR FILM / Product model

Semi-solid aramid-coated separator
JTF-R208DL

Semi-solid aramid-coated separator (model JTF-R208DL) is an aramid-coated lithium-ion battery separator produced by Taizhou Jitri FengFang New Materials Technology Co., Ltd., with a nominal total thickness of 14 µm. It adds an organic para-aramid coating on top of a polyolefin base film, which raises the heat resistance and mechanical strength of the separator and improves adhesion to the electrode, suppressing lithium dendrite growth and stabilising the interface. It suits EV traction batteries and high-safety consumer electronics. The exact coating composition and coating sequence are company trade secrets and are not published; they can be discussed in a one-on-one technical meeting.

01

Technical requirements

The nominal requirements below are registered in the company shipping technical specification sheet, each with its test method and the standard it follows.

Total thickness 14µm Nominal total thickness; the actual value of a batch follows the test report
Thickness tolerance 14±2µm Measured at five points and averaged, per GB/T 6672-2001
Porosity 40±5% Calculated, per GB/T 36363-2018
Puncture strength ≥450gf 1.0 mm probe, tensile testing machine
Areal density 11±2g/m² Weighed and calculated, per GB/T 31729-2015
Air permeability 300±50s/100ml Time taken for 100 mL of air to pass through
Test itemNominal valueStandard
AppearanceMilky white, free of pinholes, creases, tears or deformation -GB/T 36363-2018
Thickness14±2 µmGB/T 6672-2001
Areal density11±2 g/m²GB/T 31729-2015
Porosity40±5 %GB/T 36363-2018
Air permeability300±50 s/100 mLGB/T 36363-2018
Puncture strength≥450 gfGB/T 36363-2018
Tensile strength MD / TD≥1800 / ≥1500 kgf/cm²GB/T 1040.3-2006
Thermal shrinkage (150 °C / 0.5 h) MD / TD≤4.0 / ≤4.0 %GB/T 36363-2018

The table gives nominal values; the measured data of a specific batch follows its test report. A roll whose appearance fails is rejected, and any failing physical property should be re-checked.

02

Performance

Each core property is given with its test condition and the standard it follows.

03

Standards and test equipment

Section 4.1 (standards) and 4.2 (test equipment) of the shipping technical specification sheet.

Main test equipment: Pinhole detector (Labthink SBG-80T), Thickness gauge (Miuimar C1202, 0.01 mm micrometer), Electronic balance (BSA124S), Air permeability tester (GURLEY 4110+4320), Electronic tensile tester (ASR-1021), Forced-air drying oven (WS-101-0AB).

04

Other models

All models on sale and their total thickness.

ModelProduct nameTotal thickness
JTF-R20LA8Aramid-coated separator9 µm
JTF-R10LPAramid-coated separator11 µm
JTF-R208BLAramid-coated separator11 µm
JTF-R10DHSemi-solid aramid-coated separator13 µm
JTF-R20LD8Aramid-coated separator14 µm
05

Packaging, storage and warranty

The product is packed in a reinforced bag, positioned on a locating plate inside a rigid carton, and an inspection report is included in the package. The outer label sits in a prominent position on the carton and the inner label on the inside of each separator roll; both state the company name, the product name, the model and the specification.

Storage: keep sealed in a clean, dry and ventilated warehouse, more than 2 m away from heat sources, out of direct sunlight, protected against mechanical impact, rain and sun, with moisture protection. Shelf life is 12 months from the production date.